Showing posts with label geometry. Show all posts
Showing posts with label geometry. Show all posts

Monday, September 23, 2013

INDUCTIVE AND DEDUCTIVE REASONING

Simple logic was a favorite topic in my Philosophy degree, so my enthusiasm for the Geometry chapters that deal with reasoning can be easily explained.  The roots that are developed through the Geometry curriculum can be used in many other contexts: debate, essay writing, solving problems, and even convincing your parents to extending curfew.  In Geometry class right about now, if logic precedes introduction of two-column proofs, we should be thinking about inductive and deductive reasoning.

INDUCTIVE REASONING goes from the specific to the general, from observed details to global conjectures.  It’s what a scientist would use to develop a hypothesis after collecting data, discovering a pattern, and assuming that the pattern will continue.  It’s also the thinking that is expected on the last couple of questions in any data set on the ACT Science Reasoning section.

A determining factor of inductive reasoning is that conjectures based on an infinite universe can never be proven.  We can only DISPROVE them.  Let’s say a statistician collects a huge amount of data about  monkeys in a maze.  The data shows that every time a monkey consumed carrots before running the maze, the elapsed time was shorter than without eating carrots.  This pattern continued with tens of thousands of monkeys.  The scientist hypothesizes that eating carrots will always improve a monkey’s speed in running a maze.  It would be impossible to test every monkey, so we could never prove the hypothesis is universally true.  But find just one monkey whose performance did NOT improve and the hypothesis is disproven.

The same principle of finding a counterexample will be helpful later when we get to indirect proof.

DEDUCTIVE REASONING (general to specific) starts with a global statement, properties, definitions, postulates, or theorems and applies them to form conclusions in specific situations.  It assumes that what is true of the large group is true of all of the members of the group.  This is the form of reasoning we’ll be using in two-column proof in Geometry.

Within deductive reasoning, we find two important principles: the laws of DETACHMENT and SYLLOGISM.

                 DETACHMENT
follows my proposal that mathematicians aren’t poets engaging in metaphors.  When mathematicians mean detach, they say detach.  So the Law of Detachment says that something can be removed or detached.




If P implies Q
and P is true (given)
then Q is also true.
Q can be detached from the original statement and concluded to be true. This is a primary construction in Geometry  proofs.

1.  If a polygon has three sides, then it is a triangle.
2.  This polygon has three sides.
3.  Therefore, it is a triangle.

                  SYLLOGISM: 
If you learned the transitive property in Algebra, you already know about syllogisms.
The placement of P, Q, and R are important in syllogisms.  R is the conclusion you want to come to and is considered the MAJOR term.  P is called the MINOR term, and Q is the MIDDLE term.  As “transitive” implies, we’re moving over or across the Q to get P to relate to R.



VALIDITY AND SOUNDNESS

CAUTION!  When we’re talking about logical steps to conclusions, we need to distinguish between validity and soundness.  If an argument is VALID, it follows the syllogistic steps already listed.  Validity is determined by the form of the argument and says nothing about truth, either of the premises or the conclusion.  A conclusion can be valid but unsound.

If the premises are not true, even if they follow appropriate steps, then the conclusion is not sound.  In order for an argument to be SOUND, the proper logical steps must be followed and premises must also be true. 

Here’s an example of a valid argument which is NOT sound.

    All my pets are mammals.
    Lizzie the Lizard is my pet.
    Therefore, Lizzie the Lizard is a mammal.  (Valid, but false: a lizard is not a mammal. The conclusion is not sound because the first premise is not true.)

Some students try to determine the validity of a conclusion by deciding if it and the premises are true.  This is a slippery slope in logic.  A better approach is to put premises into the “P implies Q” format and look at the steps used to arrive at the conclusion.

This example is not even valid because the steps are wrong, but the conclusion could be either true or false:

P, Q, and R statements might go like this:
    All dogs are mammals.
    All cats are mammals.
    All dogs are cats.  (Not Valid because the steps are wrong, and not Sound even though both premises are true, and obviously false.)

Looking only at the truth of the conclusion to determine its soundness can lead to mistakes.
    All mammals are born alive.
    All elephants are born alive.
    Therefore, all elephants are mammals.  (The conclusion is true, but the logic is not valid because it does not follow the Law of Syllogism, and the conclusion is not sound because the first premise is not true.  The platypus is not a mammal but offspring are born alive.)

-------------------------------------------------------------------   

SUMMARY FOR YOUR LOGIC STUDY CARD:

Inductive Reasoning: specific to general

Deductive Reasoning: general to specific
     Detachment: If A, then B.  A.  Therefore, B.
     Syllogism:  If A, then B.  If B, then C.  Therefore, If A, then C.

Validity:  Are the Laws of Detachment and Syllogism followed?

Soundness:  Are the premises valid AND true?


Sunday, September 22, 2013

TRUTH TABLES

In arithmetic and algebra, we are  working largely with numbers.  When Geometry comes into play, a lot of the work involves words to convey theorems and postulates.  “If a triangle has three congruent angles, then it is an equiangular triangle.”  Try writing THAT with X and Y!!  So now we need a way to work with these statements and to know when a statement is true.

You’ve already learned some things about an “if-then” conditional statement. Remember converse, inverse, and contrapositive?  For truth tables, we’ll call the first part of the conditional statement "P" and the second part "Q."  I can’t think of a specific reason for selecting these letters, but they are the ones other mathematicians use, so why not? 

For a conditional statement like “If two angles form a straight line, then the angles are supplementary,”  P will be the “two angles form a straight line” part and Q will be “the angles are supplementary” part.  Notice that "if" and "then" are detached.  They always stay in the same order, but we'll move the P and Q parts around.

The original statement can be summarized as “If P, then Q.”   For further brevity, we can write
and read it as “P implies Q.”

If P is true, then not-P ( -P) is false.  And if Q is true, then not-Q (-Q) is false.
-----------------------------------------------
Now for the TRUTH TABLES.  There are four ways to judge the conditional statement.  The first part (P) can be true and the second part (Q) either true or false.  Or the first part can be false while the second part is either true or false.  The truth table looks like this:

Notice that the statement is only false under one scenario:  when the first part is true but the second part is not.  That may seem counterintuitive, so let’s look at it closely.


Let’s think of a more personal conditional statement “If you miss only one question on the quiz, I will give you an A.”  If you live up to your side and I give you the A, I’ve followed through on my promise, so the first line is true.  But if you miss only one question and I renege, then Q is false and the original implication must be false also. We can all agree to the first two lines of the truth table.

But when we consider the last two lines, it’s not as obvious why the statement is still true even when P is not.  If you miss more than one question, it doesn’t matter what grade I give you, I haven’t broken my promise, so the implication has NOT been proven false and is therefore still true. 

You already learned the CONVERSE, INVERSE, and CONTRAPOSITIVE of the conditional statement.  Here are the corresponding truth tables.

CONVERSE:  Q implies P.....









INVERSE:  not P implies not Q...

CONTRAPOSITIVE: not Q implies not P...






-------------------------------------------------------------
Here’s the TRICK to accurately filling out the truth table on the next quiz.  Look at the first part of the combination. 
•If it is true and the second part is also true, the conditional statement is TRUE. 
*If the first part is true and the other part is false, the conditional statement is FALSE. 
*If the first part is false, the truth statement is TRUE, no matter what.

In other words, the only time the conditional statement is FALSE is when the first part is true but the second is false.







You probably won't find "truth tables" outside of this unit in geometry, but you'll find them useful in unexpected ways throughout life.  Need to evaluate the speeches of political candidates or sales pitches and advertisements?  Well, if the first part of the statement isn't true in the first place, then anything in the second part can be false and still not be a technical lie.  Understand truth tables and you won't be fooled in choosing your vote or buying a product or service.  This is the logic part of math and it's a valuable lesson.  In fact, LOGIC may be a course you could take in college, especially if you major in premed or prelaw.

Tuesday, February 8, 2011

LINEAR AND ANGULAR VELOCITY


Trigonometry students have this to look forward to, but those in College Algebra may be reexamining these issues right now. Although linear and angular velocity questions can be answered using Geometry concepts alone, calculating circumference and using degrees can create long solutions with lots of opportunities to make silly, little mistakes. Here are the equations you need in order to turn these problems into simple substitution work.

First, take a look at the names of these concepts: LINEAR deals with lines and is the familiar “miles per hour” measurement. In circular motion, it's the line measure we call circumference. ANGULAR deals with angles in a circle -- in common terms RPM, or revolutions per minute. Velocity, as we commonly know it, is distance divided by time.


To make things simple, we can calculate Angular Velocity first and use it to quickly find Linear Velocity.

Remember in Geometry that we calculated the arc length.


Given a radius of 4 and a central angle of 50... S = (50/360)• 4•4π = 20π/9.


From Trig, we can convert the degrees to radians:




That’s your first equation...


To find Angular Velocity, we want the central angle measured in radians, θ, divided by time. Oh, and we get a new, cute symbol that some will be calling “W,” but what is actually the Greek letter “Omega,” ω.

That’s your second equation...
If the question gives you RPM (revolutions per minute), you can convert rpm to radians by multiplying by 2π, the radians in each time around the circle. Don't forget to convert minutes if a different time measurement is requested.

So starting with the old velocity equation, substituting S (arc length) for distance, then substituting r θ for S, and finally substituting ω (omega) for θ over t , we have the final equation: Linear Velocity.


If equations are difficult for you to remember, try printing up this visual display:


Linear velocity is the outside equation; angular velocity is the inside equation.

Tuesday, January 4, 2011

THE AMBIGUOUS CASE (Geometry and Trig)

Remember triangle congruence in Geometry? In what ways can you prove two triangles congruent? SSS (side-side-side), SAS (side-angle-side), ASA (angle-side-angle), AAS (angle-angle-side), HL (hypotenuse-leg).

But why can’t you use SSA (side-side-angle)?

BECAUSE IT’S THE AMBIGUOUS CASE! (What a great SAT word - ambiguous - meaning “unclear”)

Let’s take 2 sides of a triangle and the non-included angle (SSA).
We know the lengths of the two green legs and angle A, so the dotted line is the path that line AC will take even though we don’t know how long it will be.

But we don’t know angle B, so line BC can swing either left
or right

Notice that angle B could be either acute or obtuse. When you use the Law of Sines to find angle B, the calculator only gives you an acute angle. This will certainly be one value of angle B, OR THE ANGLE YOU CALCULATE MIGHT BE THE REFERENCE ANGLE OF OBTUSE ANGLE B!

How do you know if the obtuse angle is really possible ? This is the AMBIGUOUS part. You have to “think” about it, or rather, you need to "calculate" about it.

Take the angle you know (angle A) and add the angle B that was the result of the Law of Sines. By subtracting the sum from 180°, you will have one value of angle C.

Now use the angle calculated through the Law of Sines as the reference angle to find the other possible value of angle B. Add known angle A to it. Are there any degrees left for angle C? (Is the sum still less than 180°?) If angle A plus obtuse angle B is less than 180 degrees, you have a second possible triangle from the given information.



If you’re a fan of math, the rigorous explanation might appeal to you:

Given 2 sides and the non-included acute angle and the length of the side opposite the angle is greater than the length of the adjacent side multiplied by the sine of the angle (but less than the length of the adjacent side), this is the ambiguous case and two different triangles can be constructed.

Given: AB
Given: BC
Given: angle A, where angle A < 90°

If BC > AB(sin A)
and BC < AB,
the you have an AMBIGUOUS CASE.


Here are a couple of questions to add depth to the concepts relating to the Ambiguous Case:
1. The triangle congruence rule AAS (angle-angle-side) is really a special application of another triangle congruence rule. Which one is it? Explain why. (Hint: Think of the "no choice" rule.)
2. Why does the calculator only give you one possible value of angle B? (Hint: Think about the quadrants of inverse sine, inverse cosine, and inverse tangent.)
3. What unique characteristic of the unit circle (and inverse sine) applies when you use acute angle B as a reference angle? (Hint: Think about the sum of the degrees in a triangle and the degrees in a straight line or semicircle.)
4. The rigorous explanation emphasizes that BC must be shorter than AB. Why? (Hint: Look at the diagrams of BC swinging left and right. What would happen if BC was longer than AB?)
5. Why does the rigorous explanation stress that the known angle must be less than 90°? Why couldn't it be 90°? (Hint: Think about HL.) or obtuse? (Hint: Think about questions 1, 2, 3, and reference angles.)

When you think about it, there really isn't anything new in your math study......just more ways of using what you already know!!

Sunday, August 8, 2010

GET READY FOR THE NEXT LEVEL OF MATH

With the Fall semester right around the corner, conscientious students are starting to recognize that familiar “butterfly” feeling. What will my classes be like? What will I be expected to learn? to do? to know already?

It’s that last question that you can control. Be prepared to move forward in your next math class by reviewing what you already know. Here’s a handy list of concepts for the most frequently required math classes.

ELEMENTARY ARITHMETIC:
-- Start practicing adding, subtracting, multiplying, and dividing.
-- Practice multiplication tables and number families.

PRE-ALGEBRA:
-- Practice those computation skills so adding, subtracting, multiplying, and dividing are quick and easy for you. This will give you the mental space to learn the first concepts that will take you from arithmetic to mathematics.

ALGEBRA I:
-- Review last year’s work in Pre-Algebra if you still have it.
-- Ask the local library if there is a copy of the Algebra textbook on the shelf. It would probably be a reference copy, so you won’t be able to check it out. Make a photocopy of the Table of Contents and leaf through the first chapter which is frequently a review of past material.
-- Be prepared for these concepts:
COLLECT LIKE TERMS
SOLVE EQUATIONS WITH ONE VARIABLE
PROPERTIES OF REAL NUMBERS (Commutative, Associative, Distributive, Identify, Inverse, Reflexive, Transitive, Substitution)

GEOMETRY:
Do you want the good news first or the bad news? The good news is that there is very little in the average Geometry curriculum that you don’t already know. You’ve been learning a little Geometry every year since Kindergarten, which is the bad news. Some of the concepts you learned maybe 9 years ago and they may be buried under a lot of other stuff that you’ve learned in the interim. Start digging!
-- SHAPES -- square, rectangle, rhombus, parallelogram, trapezoid, circle, triangle. Know how to tell what each shape is (properties) and the equation for finding the area.
-- AREAS -- yes, I know I’ve mentioned that already, but it is a basic concept that causes trouble for many students. Know how to calculate areas and perimeters, too.
-- VOCABULARY -- The names of shapes is an example of vocabulary that you will be expected to already know. Add point-line-plane to the list, as well as diagonal, radius, diameter, arc, area, perimeter, volume (and related equations), Pythagorean Theorem, isosceles, equilateral, equiangular, skew, obtuse, acute, complementary, and supplementary. There may be more terms that you’ve already learned. Can you add to the list?
-- ALGEBRA -- “WHAT? I have to know last year’s Algebra in order to succeed in this year’s Geometry?” Yes. You’ll be asked to solve Geometry problems by using one-variable equations (like area) and systems of equations too. There may even be a few quadratic equations, so review factoring.
The biggest hint for success in your Geometry class is to learn the postulates and theorems well and as they are introduced.

ALGEBRA II:
-- Review your Algebra I notes from 2 years ago. If you haven’t developed the practice of filing notes from each class, resolve NOW to archive old class material now that you see how helpful it can be in future years.
-- Be prepared to factor quadratic equations and FOIL binomials.
-- Review the real number properties that allow you to solve equations.

TRIGONOMETRY:
Triangles are paramount shapes in Trig, so review everything you've learned about them. Pythagorean Theorem will have new applications and SohCahToa with be the basis for learning 3 more side relationships. A little review of circles will be helpful in the first couple of weeks when you're introduced to the Unit Circle.
A huge hint for success in Trig is to learn the Unit Circle when told to do so. You can expect to be tested on it in a stringent, timed format. After enough time to forget what you've memorized, you'll be expected to actually USE the information, so try to find patterns in the angles and the sine, cosine, and tangent values. This strategy will help you access the information in later problems.

PRECALCULUS:
Factoring is a stumbling block for even some high ability students. Practice it until you could "factor in your sleep." Review graphs of second and third degree equations, square roots, absolute value, and rational equations. A quick review of your old Algebra II work can help you to recall concepts you learned previously. Much of Precalc will be an exercise in deeper analysis of these same concepts.

IN GENERAL:
Check out older blogs for more detailed tips for each class.

GOOD LUCK!
Not everyone is as excited about the beginning of a new semester as I am, but I know for sure that success in the first few weeks of school can lay the groundwork for a productive course and a good grade. My goal is for YOU to be the first student in the class to answer a question correctly. I want the teacher to go home that night believing that YOU are the best student ever. My experience shows that this can become a self-fulfilling prophesy that can enhance your classroom and exam performance.

Wednesday, March 24, 2010

ACT MATH CHECKLIST

Oh, yeah. There's a LOT of Math to know for the ACT and it is easy to skip over some important rule or formula. Here's a checklist of the concepts mentioned in previous blogs. Use it to refresh your memory and insure that you've covered each concept sufficiently. As you take practice tests, highlight the math facts that caused errors and review those again.

BASICS
___ fractions
___ percents
___ percent change
___ word problems
___ ratios
___ average
___ area

ALGEBRA
___ factoring
___ distance formula
___ midpoint formula
___ rules of exponents
___ graphs
___ functions
___ conic equations
___ logs
___ sequence and series
___ probability
___ variation
___ systems of linear equations
___ matrices

GEOMETRY
___ special right triangles
___ SohCahToa
___ parallel lines and transversals
___ properties of quadrilaterals
___ circles
___ sum of interior angles of a polygon
___ volume
___ similar triangles
___ relation between lines, areas, and volumes

TRIGONOMETRY
___ Pythagorean Identities
___ The Unit Circle

There. That wasn't so bad, now was it? Stay tuned to this blog site for analysis of recent ACT test questions and any changes that we discover.

IMPROVING ACT MATH, PART 2

Now that the first 30 Math questions are perfect, and the next 15 are within sight of "perfect," it's time to buckle down on the last 15 questions and possibly fill in some of that Algebra II that may have appeared earlier on the test.

ALGREBRA II
- rules of exponents - when multiplying the same base, add the exponents; to raise an exponent to a higher power, multiply (and don't forget the coefficient if it's in a parenthesis with the variable); when dividing the same base, subtract the exponents; A NEGATIVE EXPONENT CHANGES THE POSITION OF THE BASE, NOT IT'S POSITIVE OR NEGATIVE VALUE (this is the most widely missed question relating to exponents).
- graphs - recognize linear, quadratic, and third degree graphs and translations of each. Know how to calculate or recognize slope, X intercepts (these are solutions -- any ordered pair satisfies the equation but only the roots solve it), Y intercepts, and points of intersection (where two graphs meet). Practice telling a story that fits a combination graph.
- functions - recognize odd and even functions from their exponents. Use the vertical line test to prove that an equation is a function. Use both the vertical line test and the horizontal line test to prove that the inverse is also a function (or that the original function is "one-to-one.") Practice substitution and compositions of functions.
- conic equations - circle (Did you realize that this is also the Pythagorean Theorem?), ellipse, hyperbola, and quadratic, too.
- logs - basic rules for expanding and simplifying.
- sequence and series - arithmetic and geometric. Arithmetic has a common difference (add the same thing every time to get the next term) and geometric has a common ratio (multiply by the same thing every time to get the next term).
- probability - successes divided by possibles. (Do you see a similarity with percent change?) Probability questions are appearing in the first 30 questions on a regular basis these days.
- variation - direct ( Y = kX) and inverse ( Y = k/X).
- systems of linear equations - substitution and elimination methods are used to solve for one variable at a time.
- matrices - setting up from a system of equations, adding, multiplying, and expanding through scalar multiplication. (Here's a perfect place to use the calculator to it's highest purpose!)

GEOMETRY
- good news - most of the geometry used is actually part of the elementary curriculum AND you won't have to do any proofs.
- special right triangles - Pythagorean Triplets, 30-60-90, and 45-45-90. Although you can always use the Pythagorean Theorem to find these relationships, the ACT and other college entrance exams are TIMED and knowing that 5-12-13 is a triplet can save precious minutes.
- SohCahToa- sine equals opposite over hypotenuse, cosine equals adjacent over hypotenuse, and tangent equals opposite over adjacent.
- parallel lines and transversals - know which angles are congruent and which are supplementary.
- properties of quadrilaterals - parallogram, rectangle, rhombus, square, trapezoid, and kite.
- circles - all radii are equal. (This is the most valuable property of a circle and will usually figure into a solution if a circle is used in a question.) Central angle equals the arc, inscribed angle equals 1/2 the arc, and outside angle equals (the big arc minus the little arc) times 1/2. Lines tangent to the circle are perpendicular to the radius.
- sum of interior angles of a polygon - (the number of sides minus 2) times 180 and each angle in the regular polygon is that equation divided by the number of sides. In a later blog, we'll look at another way to get the same answer without the need to remember an equation.
- volume - (if the sides are perpendicular to the base) the volume is "the area of the base times the height." (if the shape is a pyramid or cone) divide the answer by 3. The equation for finding the volume of a sphere will probably be given in the question.
- similar triangles - all angles are congruent and sides are proportional -- set up congruent ratios.
- relation between lines, areas, and volumes - if the sides are in the ratio 2 to 3 (2/3 or 2:3) then the ratio of the areas is (2/3) SQUARED, and the ratio of the volumes is (2/3)CUBED. Lines are first degree, areas are second degree, and volumes are third degree.

TRIGONOMETRY
- good news - probably half of the questions that the ACT calls Trig are from the Geometry curriculum in many schools. Go back and review everything you know about triangles, especially those pesky word problems involving shadows and ladders leaning against buildings.
- Pythagorean Identities - yet a fourth application of the Pythagorean Theorem. It is no wonder that we frequently say it is the "most important equation in all of math"and luckily it's taught around the fourth grade. Sine^2 + Cosine^2 = 1.
- The Unit Circle - know your reference angles and what's positive in each quadrant. ACT trig questions will usually refer to the axes and angles in radians, so know how to convert from degrees if needed.

You might be amazed at all of the Math that you've learned through the years. There are probably only a very few concepts that you haven't studied, so preparing for the Math section is really refreshing your brain and bringing the useful information to the top where it can be accessed quickly on demand.